Peg Bomber Flies Again!

The little problems I left behind me when I had my break from modelling have now come home to roost. I had forgotten that I had decided to change the way I would display my little peg planes, moving from my thrown together cocktail stick stand to a proper commercial plastic one.

I had bought a set of square acrylic flight stands - made tabletop game aircraft and space vehicles - because I think they look a lot better than a 'stick'. Actually, I think they look better because they are less noticeable than my cocktail stick contrivance...

The problem with this change in direction was that I had already nearly completed my peg model, so I've had to go back and make a suitable hole into which I could fit the new stand's socket. All I could think of doing was to re-drill the smaller hole I had made for my stick-stand so that I could fit the larger diameter plastic socket into the underside of my plane.

It was a wee bit tricky as I had to use a relatively large drill bit and I was quite worried in case I damaged my model during the handling. I took things slowly and carefully and eventually had a hole into which the plastic stand slid.

What I intend to do next is superglue the socket part of the stand into the hole, that way I can take the plane off the stand if I want. I was a little worried that the small diameter of the square base might not support my plane, but it does (at least it does at this height - 4cm - though if I want to increase the 'altitude' for a game, say, I would have to get a wider base). 👍

Well, job done - and with all the touching up of the model complete all I have to do now is a apply a couple of coats of glass varnish and the job's a good 'un.  That's next.

Peg WW1 Light Bomber - Part 5

Painting Check...
I've been a little unsure about my paint scheme for my little bomber aircraft so I've taken some test photos just to reassure myself that everything is going OK. Sometimes you need to see some photos, which seem to give you a little 'distance' from which you can assess your progress in a more detached way (that probably makes no sense to you whatsoever)!

Anyway, here's where I am so far...

I *think* this is going in the right direction..?

Peg WW1 Light Bomber - Part 4

And so, the painting begins...

I've decided to go with a pretty plain and widely used colour scheme for my bomber, a 'canvas' buff. While this was associate with earlier WW1 aircraft - from, say, 1914-17 - I'm imagining that my Molatarian Rebels of the 1918 uprising might be using older aircraft (I'm making this up as I go along - like everything else I do).

I thought the overall buff colour went nicely with the older 'pusher' design of aircraft. But will be adding a rather novel rebel slogan to the upper wing to add some interest to the scheme. The faction colour will be the blue, white and black scheme that I have designed for my rebels.

I designed my revolutionary slogan in Adobe Illustrator using a
vaguely Romanian/Cyrillic looking font. Then I printed it out
and traced the design onto the top wing...

My imaginary nation of Molatero is loosely based on Romania (ish)
and so I have used the modern political slogan of 'Rezist' as it
seemed so apt for a catchphrase of a civil uprising.

Otherwise, the rest of the painting is very straight forward and pretty easy. Being a simplified and stylised model detailing is pretty much non-existent and there will be few colours used. I'll start 'inside' and work 'out'...

To be honest, this paint job - being family plain - shouldn't take too long finish...Hopefully!

Peg WW1 Light Bomber - Part 2

Well, I'm still making this up as I go along,  so I've only a vague idea which way this one is going!

I began the session by doing some more work on my 'bead' rotary engine...

The cocktail stick arrangement at the rear is just a device I made for reference so I can determine how I might start to make a tail section.

Next I move onto making the main wing struts. Cocktail sticks at the ready, this is going to take quite a few...

My careful measurements of the layout of the wing struts worked out as the top wing fitted easily in place. While loosely based on the design of the Airco DH. 2 the layout isn't exactly identical, especially where the fuselage struts connect to the top wing...

Well, that worked out OK, but the tail section is my next challenge. I have plenty of reference to base the flimsy tail - the Airco DH. 2, Royal Aircraft Factory F. E. 2, Vickers F. B. 6 and French Breguet V all used this 'pusher' arrangement and the delicate tail section it required. Though, I'll probably modify the designs to suit my idea of this imaginary aircraft.

I went for a slightly unfeasible 'twin boom' arrangement, just for fun and to make it suitably distinct from any actual historical aircraft type. I'm not even sure that such an arrangement would work! (I may add to it, just to give it some more period flair!)

Well, that's it for this session. She's a big beasty (would still like to have a go at a twin engined bomber though). In the next part I will begin the paint job, I'll just have to decide on a suitable colour scheme.

Peg WW1 Light Bomber - Part 1

I really enjoyed making my first peg plane - see 'The Purple Baron' - and I had always intended this to become a small series of 'historic Molatarian military aircraft'. In fact, I had already an idea for my next aeroplane model...

The backstory for my first plane was that it represented a fighter aircraft of the Loyalist (or Royalist) faction during the 1918 Molatarian Civil War. Naturally, I imagined that there would be a 'Rebel' faction and they would have also fielded some aircraft and I wanted to make a model of one of these.

The wonderful thing about WW1 aircraft is that there was such a diversity of designs - flight still being in it's infancy - and this would allow me to indulge my imagination with some quite exotic models. Having done a pretty conventional biplane design I now wanted to explore something a little more unusual.

The 1917 Zmeu Roşu ('Red Kite') Pusher Light Bomber
I have always liked the 'pusher' aircraft design - the British Airco D.H. 2 is a favourite plane of mine -  but I thought it might be nice to have a two-seater light bomber model to compliment my first single-seat fighter model. Examples of this type would be the British Vickers FB-6 or Royal Aircraft Factory F.E.2 (both 'pusher' fighters) and the French Breguet Bre.5 (a 'pusher' bomber)...

The French Breguet Bre.5 bomber of 1916. Source: Wikipedia.

Of course, as usual, my peg model will be of a simplified, toy, design and will also be intended to represent a fictitious Molatarian type!

Peg Pusher Construction
I'll be largely following the process of construction I established with my 'Purple Baron' plane. The fuselage will be a shaped wooden dowel or peg...

Obviously, I have shaped the 'cockpits' by sanding out scalloped shapes using my Dremel with a small drum sander. Pilot at the rear, gunner/bombardier in the front cockpit.

The main feature of the 'pusher' type is the rear mounted and facing engine and principally these early engines were the ubiquitous rotary engine. My little plane will have a simplified rotary engine which I will make out of six wooden beads, representing the engines cylinders... :)

Second Thoughts...
The one downside of this 'make it up as you go along' approach to modelling is you don't have a plan (obviously) so you don't exactly have a true sense of the final scale. While my fuselage looked right, it clearly wasn't once I started estimating the wing span required and how ling the tail section would be!

In short, my 'light' bomber would have eventually turned out to be something more akin to a 'heavy' bomber...Way bigger than I wanted it and too big for a single engined aeroplane. So I quickly made up a second slightly shorter fuselage...

I'll keep the longer fuselage as it would be nice to have a crack at a heavy, two engined plane at some point. The shorter fuselage should produce a plane only a little larger than my original bi-plane fighter...Hopefully.

A Wing and a Prayer
Time to cut out the wings, I'm using the same large wooden tongue depressor sticks that I used for the wings on my bi-plane. This time, though, the wing span will be slightly wider and the edges will be more square cut...

And now my second gaff...I failed to work out a way to attach the wings where I could easily check that they were on square! In other words, like so much of my stuff, I attached the wings by eye (they sorta looked straight and square-ish).

(I maybe should've made some sort of template or something.)

Anyway, I thought 'what the hell' and glued the lower wing on...

...I also put together the undercarriage.

I Have  a Cunning Plan!
Having just told you that I don't have a plan and that I'm making this up as I go along, I will contradict myself by saying that I do have a bit of a plan.

One problem I came across with my original peg bi-plane was when it came to painting it. I found is very difficult to paint the pilot and the upper fuselage with the top wing installed. So, this time I intend to paint all the parts before I install the upper wing.

This means I will have to do some careful preparation which will allow me to paint as much of the plane as I can before gluing the upper win on, perhaps by making some pilot holes in the wing so I can just drop the top wing and tail on accurately...

Careful planning and measuring for the next step as I want to install the
top wing and tail unit after painting the top of the fuselage.

Figures crossed that I can get all the separate assemblies to match up correctly. We shall see in Part 2.

Charmingly illustrated 'History of WW1' in 6 minutes

With the centennial anniversary of the outbreak of The Great War coming up it seems that the world of Funny Little Wars is donning it's tin hat and readying itself for the pretend war to end all pretend wars. So it's perhaps time to remind ourselves how the whole cuffufle began with this charmingly illustrated potted history...